Table saws are the workhorse of the average shop. When you’re just starting out, you don’t want to spend a fortune on a table saw that has features you’ll never touch, especially if you may not continue to use the table saw. Another benefit of buying the best beginner table saw is that you’ll learn how to use a table saw, keeping you engaged in the hobby because you didn’t try to start with an advanced model. If you’re looking for the best table saw for beginner, understand that there is no one size fits all model. We’re going to share our list of the top 7 best starter table saws suitable for beginners.
Reviews Of Best Table Saws For Beginner
DEWALT Model DW745 10-Inch Compact Job-Site Table Saw with 20 Inch Rip Capacity
Portable table saws can be a great starter saw for new woodworkers. This saw is designed for portability. It weighs less than fifty pounds. It is made to be set up on a stable table but can work when sitting in the back of a truck. It has many of the basic functions beginner woodworkers need. For example, it bevels 0 to 45 degrees.
One of the points in favor of this good beginner table saw are the protective features built into it, protecting the saw from your mistakes. It has a steel roll cage that protects it when dropped or put down too heavily. Its rack and pinion system makes it easy to use and ensures accurate cuts.
It has a small work surface, but its fencing system allows you to cut large sheet materials. Because it is designed for use on worksites, it can safely work with frozen, wet and hardwoods. It will turn off automatically if it hits something it cannot handle. This allows you to work with whatever wood you found at the lumberyard without wondering if the saw can safely handle it.
It has basic features like a push stick. A dust port and 24 teeth saw. It is all powered by a moderately strong 15 amp motor. The saw has a blade guard, but you may want something else if you’re concerned about protecting curious fingers from injury or still learning the basics of woodworking.
SKIL 3410-02 10-Inch Table Saw with Folding Stand
The Skill table saw has a basic 20 inch by 26-inch work table that extends another six inches to handle larger pieces. It has a cut height of 3.5 inches, so only buy this woodworking saw if you aren’t going to cut anything bigger than that. It isn’t meant for furniture makers.
The Skill table saw is a good choice for beginners. You can quickly set it up and tear it down, so it is almost as transportable as the first saw on our list but also easy to stow away in storage. It weighs just under seventy pounds. So the first saw on our list is better if you’re going to be toting your saw to various worksites.
This is the best entry level table saw for those doing more than cutting two by fours. Also it is one of the best table saw under 300 dollar. It has a standard zero to 47-degree bevel angle, but the self-aligning rip fence lets you make accurate measurements. The measuring system allows you to verify angles as you’re working. It is a bare-tool system; if you want all the accessories, the Rockwell Bladerunner saw on our list is the better choice.
Rockwell BladeRunner Model RK7323 X2 Portable Tabletop Saw with 7 Accessories
The Rockwell is the best starter table saw for those who want to get everything they need in one package. The portable tabletop saw comes with a rip fence, miter gauge, and more. This is an excellent saw for mid-level woodworkers.
It is capable of inside cuts, miter cuts, scroll cuts and rip cuts. This is the best inexpensive table saw for those who want to work with more than wood. It is powerful enough to cut plastic, aluminum, tile, softer metals, and wood. If you looking for a inexpensive best tile saw under 300 dollar then this can be a good choice.
A point in its favor is that you can quickly change blades to switch between materials without using any other tools. While this saw comes with a variety of tools and accessories, it is compatible with any four-inch T-shank jigsaw blades. That is in addition to the five-piece starter blade set.
It has a three quarter inch stroke length, so the biggest limit is the size of the item it can cut through. A minor downside is the small table; that’s just sixteen by seventeen inches inside. It does have a hold-down guard to prevent the material being cut from flying up. If you are new to woodworking, you may want a saw with more safety features.
DEWALT Model DWE7491RS 10-Inch Jobsite Table Saw with 32-1/2-Inch Rip Capacity and Rolling Stand
This Dewalt saw is powerful enough to cut hardwoods and pressure-treated lumber. It is an excellent saw for those working in construction since its wheeled frame is quickly connected to legs to create a mobile table saw. You can set this up wherever you need it, even in the middle of the woods, as long as you have a power source. Just know that it has to be exactly flat to work perfectly.
The downside is its weight. The combined assembly weighs over a hundred pounds. This is not the best beginner table saw if you are looking for something that sits on your workbench or will remain in the corner of your workshop.
On the flipside, it is a good choice for construction work. The saw can cut through thinner pieces of concrete using blades that come with the saw. The cutting diameter of this saw is ten inches. The rack and pinion fence is well designed. Its safety features are excellent as well as they are properly in place.
The downside is that the fence gets stickier with time, harder and harder to put properly in place. The saw can accept a Dado blade set, but you cannot stack the Dado blades. Nor can you use Dado blades larger than eight inches. The risk here is that you have to remove the blade guard assembly in order to use Dado blades.
Craftsman Evolv 15 Amp 10 In. Table Saw, Model 28461
You get a basic table saw, stand, blade wrenches, hex keys, blade guard assembly, rip fence and other items in this package. The advanced guard system makes this the best beginner table saw for those with an eye on safety. The large on-off switch is easy to reach when you need to shut it down.
It has excellent protection against kickback. The miter gauge is easy to adjust. Heel alignment may be a little harder to get right. One downside with this model is that the miter gauge is an unusual size, so if you have problems with it, it is almost impossible to replace without going through the manufacturer.
The work surface is 25 by 17 inches, fairly average for this type of product. It weighs around fifty pounds. It is a good bench table saw, but you can take it with you to a workshop or work site. We don’t recommend trying to work with this anywhere but an indoor workshop, because the saw can be hard to get level when setting it up. It is not super-precise, but it is good enough for basic tasks like cutting two by fours.
Bosch Power Tools Tablesaw 4100-10 – Worksite 10 Inch Table Saw with Gravity-Rise Wheeled Stand
The Bosch 4100 is the best table saw for beginner woodworkers who want to balance safety, capacity, portability, and features. For example, you get a fully featured table saw that comes with a wheeled base that lets you roll it wherever you need it. Drag it around the house, load it on a trailer and take it to the worksite, or pull it out of the storage shed with equal ease.
This table saw is capable of rip cutting and cross cutting. It can cut two by fours and trim delicate pieces. It is equally useful for construction workers as those making furniture. The reason this table saw for beginners made our list is the smart guard system. It protects you from the riving knife. It has good anti-kickback pawls.
The guard assembly prevents you from making contact with the blade while simultaneously allowing you to see what you’re cutting. If your table saw will be sitting in a garage where curious hands could reach it, you want this model.
The work surface is roughly thirty by thirty inches wide. This is a relatively large work surface. It can handle stock as wide as 25 inches. This is the best table saw for those cutting large pieces of woods relatively accurately. It is almost as good as professional woodworking saws in that regard. You can swap out the Dado blades relatively quickly.
The only downside is how hard it is to adjust the saw and get it properly set up at the very beginning. If you use this woodworking saw, know that you’ll need excellent ventilation or a separate dust collection system. There is nothing preventing dust from collecting in the motor, gumming it up and killing it after a few months of heavy use.
DEWALT Model DWE7480 10 in. Compact Job Site Table Saw with Site-Pro Modular Guarding System
The Dewalt model DWE7480 table saw is another basic table saw equally at home at the construction site as your workshop. It has decent guards in place, though the fence is minimal. It is protected by a durable metal frame that doubles as supports when you set it up on a table or a truck bed.
It weighs a little under fifty pounds. You can carry it from point A to point B. Just realize there are no wheels to make this easier. The table saw can handle two by fours and larger shelving materials. It is gentle enough to handle trim materials.
It has a 24-inch rip and 10-inch cutting diameter. It is able to make straight cuts accurately. The crosscut push guide has a fair amount of play, reducing the accuracy of those cuts. Note that this table saw is not able to accept Dado blades. The miter slots are not as good as they could be.
However, the fence is great. Be very careful about leaving this saw out in the hot sun or an overheated garage, because the plastic can warp. This is especially problematic when the plastic parts around the throat plate warp.
Buying Guide for Table Saws : What To Consider?
The key factors you should consider when shopping for a saw include ease of use, price, the difficulty setting it up, the amount of setup required for each use, and the type of cuts it lets you make relative to the work you want to do. We recommended table saws designed for beginners so that you minimize the difficulty setting it up and using it that cause many to abandon woodworking.
A side benefit of purchasing a table saw for beginners is that it tends to cost less than the advanced, professional versions. Everyone needs to make basic cuts like ripping boards to width. Only look for saws that can make bevels and raised panels if you’re making furniture. A good rule of thumb is choosing a saw that is capable of doing the most complex operation you plan on performing periodically. All of this is irrelevant if the saw doesn’t allow you to safely perform the cuts you want to make. This is why the built-in safety features in a saw are essential.
Furthermore, having a large enough work surface adds to your safety, since you won’t have to get into an awkward position to get something done or risk a piece of wood falling on your feet. That’s why contractors and cabinet makers want saws that allow you to easily attach outfeed and auxiliary side tables. This does mean that you need to balance price with safety features and the overall reputation for safe use by beginners.
After all, if the guards around the saw blade are difficult to use, you may not use them. Then the fact that they exist is irrelevant, since you may not use them at the risk of losing a finger. Spend a little more to avoid unexpected medical bills and enjoy peace of mind while working with your new saw. If your saw will be located where your kids could reach it unsupervised, consider a saw with an automatic blade brake. That will automatically turn off the blade when it encounters skin.
The best table saw for beginner craftsmen will fit their budget, the space they have, and do what they need it to do on a regular basis with a minimum of effort and setup. Understand what you need, and you’ll find the best beginner table saw for your particular situation from those on our list.