We all want a table saw that gets the job done, lasts long and is affordable. Unfortunately, some of the quality table saws on the market cost upwards of $600. This makes finding a table saw that ticks all the right boxes for less than $300 and $400 a bit tricky.
Nonetheless, there are actually a lot of table saws out there that cost between $200 to $400. Problem is not all of them will give you the service you deserve. Indeed, finding the best table saw under 300 and 400 will require lots of research.
To cut down on your research time, we have prepared a list of the best table saw under 300 and 400. These saws come highly recommended. So if you are on a strict budget join us as we go in search of the Best budget table saw.
Included in the article is a buying guide. This buying guide will help you know how and why we have selected the seven table saws on this list. Also, it will help you understand what to look for next time you go shopping for the best table saw for under 400.
A Quick Comparision Of Our Top Picks
|Model||Image||Weight||Check Price||Motor Amperage||No load speed (RPM)||Blade Diameter|
|DEWALT Table Saw for Jobsite, Compact, 8-1/4-Inch...||53.3 lbs||Check Price On Amazon||15||5800||8-1/4"|
|SKIL 3410-02 10-Inch Table Saw with Folding Stand...||67 lbs||Check Price On Amazon||15||5000||10"|
|Bosch 10-Inch Portable Jobsite Table Saw GTS1031...||53.9 lbs||Check Price On Amazon||15||3850||10"|
|DEWALT DW745 10-Inch Table Saw, 20-Inch Rip...||57.2 lbs||Check Price On Amazon||15||5000||10"|
|SKILSAW SPT70WT-01 10 In. Portable Worm Drive...||49 lbs||Check Price On Amazon||15||5300||10"|
|DEWALT DWE7480 10 in. Compact Job Site Table Saw...||48 lbs||Check Price On Amazon||15||4800||10"|
|10 in., 13 Amp Benchtop Table Saw -USATM by...||N/A||Check Price On Amazon||13||5000||10"|
Our Top Budget Table Saw Reviews
DEWALT DWE7485 8-1/4 in. Compact Jobsite Table Saw
Arguably the smallest of all the saws with the DWE designation, the 7485S is a compact jobsite table saw. It does not offer much in regards to the surface area, but it does offer plenty of portability. It has the same yellow colored exterior like the other Dewalt Table Saw.
In terms of weight, it weighs 25 KG (Approx.), which is something considering there are some that weigh upwards of 70 pounds. Also, it is small enough for use at home and will take up a minimal space in your workshop.
Similar to some of the other saws on the list it has a 15 amp motor. This motor rotates a 24 tooth carbide tipped blade. The blade is capable of cutting through different types of wood easily.
Telescopic fence rails
It features the same telescopic fence found on the other two models above. In addition, this fence can be retracted to make the table even more portable. Apart from being retractable the fence also helps you make accurate cuts.
- It is a very portable table saw
- The fence is easy to adjust without the need for tools
- It is easy to set up
- Comes with storage space for storing all accessories
- The adjustable rear feet help stabilize the saw when placed on an uneven surface
- Has a rather small 24.5 inch RIP capacity
- The stand is too low for some people
The last but definitely not least on our list is compact and easy to use. However, it does not compromise on performance. Its 15 amp motor is still within the accepted motor standards. This makes it a great option for beginners.
SKIL 3410-02 10-Inch Table Saw with Folding Stand
Ask any savvy DIY woodworker and chances are they have heard of the SKIL table saw with folding stand. After all, this is one of the most popular budget tables saw among Do-It-Yourselfers. But why is it so popular?
There are a lot of people who love it for its very reasonable price tag. Others, however, are drawn to it by its design and quality. As its name suggests, it has a folding stand. It might not seem a big deal, but when you have limited space, this folding stand can make all the difference.
While it is not the lightest table saws out there weighing 67 pounds, it is very well made. The manufacturer used heavy duty steel; hence it’s rather bulky design.
EZ view system
One of the best things about this table saw is that you do not need any additional measuring tools. The included EZ view system helps you make precise and accurate cuts.
It comes with all the necessary safety features a Do-it-Yourselfer like you would need. There is a riving knife that prevents kickbacks. Also included is a blade guard which you can easily attach and detach. The onboard storage makes storing these components easy.
- Comes wh a storage space for storing the accessories
- Has a folding stand which reduces the amount of space it will take up in your workshop
- While it is heavy, it can be moved about
- It is easy to use thanks to its features
- Has all the safety features you would need
- There is no dust collecting mechanism
- Does not come with wheels
Costing less than $300 you shouldn’t expect a lot from this table saw if you are professional. However, if you are a beginner table saw user or a DIY, this saw will serve you well. And given its price tag, you will not break a sweat acquiring it. For these good reasons, we rank this table as the top pick of the best table saw under 300 dollars.
DEWALT DW745 10-Inch Compact Job-Site Table Saw
Having the right tool for woodworking makes all the difference. One of the best for at-home woodworkers is the DEWALT DW745. This is one of the more compact saws on the list and is very lightweight and portable.
It’s not the most revolutionary design I have seen, but still, it is not the worst. What makes this saw worth a place on the list though is the tool-free adjustment mechanisms. Making adjustment is easy and does not require tools.
Though not as powerful as that of other saws on the list, the 24 tooth blade on this DEWALT is sufficient. It is powered by a 15 amp motor and is capable of speeds of up to 3,850 rpm, which is not bad.
It can be used to make angled cuts thanks to the miter gauge. With this gauge and blade, it can make 3 1/8 inch thick cuts of 90 degrees. While it is capable of making 21/4 inch thick cuts of 45 degrees.
- Weighing 50 pounds, it is very lightweight
- Is offered at a reasonably affordable price tag
- Due to its design, it’s also very portable
- Comes installed with a dust collecting port
- Has a useful and convenient guard system
- The top plate is made of plastic
- It is not compatible with dado blades
This is one of the best saws on the market. And although it is not without its faults, it serves its purpose very well. It is arguably the best portable table saw under 400. This earns it a spot on my list.
Bosch 10-Inch Portable Jobsite Table Saw GTS1031 with One-Handed Carry Handle
A little bit costlier than the previously reviewed SKIL model the WEN Jobsite table saw is a versatile piece of cutting equipment. Loved by both DIY and professionals, it has plenty to offer.
What makes this saw one of the best jobsite table saws is its blade. You get a 10-inch blade capable of cutting through 3-1/8 inches thick wood. It is powered by a 15 amp motor that rotates the blade at speeds of up to 5000 RPMs.
The blade can also be adjusted between -2 to 47 degrees to make bevel cuts. This adds to its versatility.
Impressively, the table on this saw is capable of being extended on either side. You can extend the table by up to 21-1/2 In. x 22-1/2 In. This means you can support larger pieces of wood on this table saw.
A lot of us do not like the dust that accumulates when sawing. Luckily for us, this table saw comes installed with a dust chute clear out on the back of the table saw. So that you do not have to worry about dust and wood saw particles.
- Has a large table surface area for cutting
- Can be used to cut thick pieces of wood
- Can be used to make both standards and angled bevel cuts
- It is easy to use
- Gives you the option to extend the surface area of the table
- It’s a bit loud
This is not the easiest saw to assemble due to most parts being similar and poorly marketed. However, when fully assembled its quality is at par with that of the best table saw under 300. It can be used by both professionals and Do-It-Yourselfers.
SKILSAW SPT70WT-01 10 In. Portable Worm Drive Table Saw
Most table saws on this list feature a folding stand. And the SKILSAW SPT70WT-01 10 In. is a Portable Worm Drive Table Saw. But this is not the only great this about this budget offering from SKILSAW.
Unlike the other products on this list, this table saw stand is made using aluminum. As such, it is one of the lightest table saws on the market. It is only 22.5 KG which is really impressive and make this saw one of the best compact saw under this price range.
Powering this saw is a 15 amp motor. The motor rotates a 10-inch blade that is able to rotate at speeds of up to 5300 RPMs. This is more than enough power for a domestic woodworker.
Brass Geared Worm Drive Table SAW
You probably know worm drive table saw are best for ripping and for that task it must need a powerful motor, For the first time ever SKILSAW uses the brass gear for the highest power and torque needed for the woodworker .
- Weighing 49 lbs, it is one of the lightest table saws
- Has a large and easy to reach on/off switch
- Comes with a powerful motor for sawing different types of wood
- It is easy to move.
- It is little bit complicated to assemble at first
Similar to the first saw on our list, this saw is best suited to small domestic projects. Easy to use and move about it is one of the best tables saw under 400. Also, it works great for small repair or renovation works in the house.
DEWALT DWE7480 10 in. Compact Job Site Table Saw with Site-Pro Modular Guarding System
The DEWALT DWE7480 looks very similar to the DW745 model. Both are yellow in color and overall have an almost similar design. However, the two differ when it comes to the features they have to offer.
It has the same 15 amp motor as the previous listing on the list. However, it is more powerful as it is capable of speeds of up to 4800 RPMs. The motor powers a 24 tooth blade is similar to the one found on the 745 models.
Given its price range, it does not have the largest RIP capacity. At 24.5 inches it is smaller than what you get from other models. All the same, this RIP capacity is enough for most wood sizes that you are likely to be sawing at home.
When it comes to accuracy, it does not disappoint. The telescopic fence and rack are easy to install. Also, they make accurate cutting easy as they are securely held in place. This telescopic fence is one of the best.
- It is a lightweight table saw
- Has one of the best fence I have ever seen on a table saw
- The fence is easy to adjust without the need for any tools
- The 24 tooth carbide tipped blade is excellent for most cutting tasks
- It is very portable
- The miter gauge is of low quality
- Does not work with dado blades
This table saw is one of the smallest. Thus it is ideal for people looking for a compact yet efficient option. It has all the features you would require in a table saw. Also, it offers a good balance between power and portability.
10 in., 13 Amp Benchtop Table Saw -USATM by Chicago Electric Power Tools Professional Series
This table saw from USATM is one of the most compact tables saw on the market as well as on this list. Apart from being compact, though it also has a lot to offer in terms of performance and construction quality.
Most table saws come with a miter gauge, and this is one of the many. The miter gauge on this saw can be adjusted by 45 degrees left and right. This means you are able to make accurate angled cuts.
For cutting the saw is equipped with a ten-inch blade. This is a carbide tipped circular blade with 36 teeth. It is powered by a 13 amp motor. Not the most powerful but given the size and weight of the saw it is more than sufficient.
Included is a 3 inch rear dust chute. This dust chute helps collect all the dust produced by your sawing. This translates to a cleaner table top and sawing experience.
- It is a very lightweight table saw
- Has a powerful blade
- Comes with an adjustable miter gauge for making angled cuts
- Is equipped with a rear dust chute
- Has a relatively powerful motor
- The cutting surface area is relatively small
- The table top is made of aluminum which is not as durable as steel
When it comes down to it, this table saw is for small projects. Therefore, do not expect it to do well with large cutting projects. Nonetheless, given its price tag, it is one you would love to have and use at home.
Buying Guide : Best Table Saw Under 300 & Best Table SAW under 400
Choosing the best table saw under 300 is not just about luck; you need to know what to look for. Here are some of the things you should look for in your next budget table saw.
Traditionally table saws have been known to be large and nearly impossible to move. But thanks to advancements in saw design, modern table saws are not as bulky as their predecessors. There are quite a number of portable saws out there.
If you are a do-it-yourselfer, then chances are you do not have a lot of space to store a huge table saw. A more lightweight and portable saw will be an ideal option as it will allow you to easily move about in your workshop.
Thus, an important factor to consider is how portable and lightweight a table is. This is especially if you have limited space to work with.
The rotations of a table saw blade are powered by a motor. Most saws in the under $300 price bracket feature a direct-drive electric motor. In terms of power, the standard is 15 amp. This is enough to cut through most types of wood.
Power tools can be dangerous and have been known to inflict serious bodily harm. It is for this reason that there are many safety laws in the US. Nevertheless, when shopping for a table saw it is important to evaluate its safety features.
Blade guards should be a standard feature and so should be a large and easy to reach the power button. Finally, an anti-kickback system can be an excellent addition as well as a riving knife.
Most power tools come with warranties, and table saws are no exception. A warranty shows how confident a manufacturer is with their product. Hence the longer the warranty, the more confidence you have in the product.
Frequently Asked Questions (FAQ)
Question: Which is the best budget table saw?
Answer: There are several table saws for the money that can be termed as the best budget table saw. But from the list, I will have to go with the SKIL 3410-02 10-Inch Table Saw with Folding Stand. It offers the best value for money.
Question: Which is the best table saw?
Answer: This will depend on a number of things key among them purpose and price. What will work for you might not work for me. On the list, however, I will have to go with the WEN 3720 15A Jobsite Table Saw with Rolling Stand. It offers features that are available with the other table saws on the list.
Question: Which company produces the best jobsite table saws?
Answer: WEN, Hitachi, Bosch are all known for making fantastic jobsite table saws. However, in my opinion, DEWALT makes the best jobsite table saws.
Question: Which table saw is ideal for beginners?
Answer: Beginners are best served by a table saw that is uncomplicated in its operation and with an affordable price tag. The one table saw that meets these criteria is the 10 in., 13 Amp Benchtop Table Saw -USATM by Chicago Electric Power Tools Professional Series.
Question: Which table saw is ideal for home use?
Answer: For home use, you need a table saw that is compact and easy to move. That being said, I will have to go with the Ryobi 10 in. Table Saw with Folding Stand. This table is both powerful and lightweight.
Question: Which is the best jobsite table saw?
Answer: DEWALT being the best make of jobsite table saws in my view, I will have to go with the DEWALT DWE7480 10 in. Compact Job Site Table Saw with Site-Pro Modular Guarding System.
Question: Should I lubricate the drive motor of my table saw?
Answer: The bearings of the most table saw drive motors are usually permanently sealed and lubricated at the factory, hence no need to lubricate. Nonetheless, you will need to lubricate the pivot points and threaded rods with a dry lubricant. Dry lubricants such as graphite and silicone do not attract or hold saw dust.
Question: How high should I set the blade?
Answer: This is a question that has been the subject of heated debates among woodworkers for years. The recommended standard is the blade should be between 1/8 inches and 3/8 inches above your workpiece.
Question: Why do I need anti-kickback in my table saw?
Answer: Kickback occurs sometimes violently and without warning when after sawing the two piece of wood move toward each other and pinch the saw blade. When the pinch is enough to clamp the spinning blade propels the board backward. To prevent this table saws come with several anti-kickback mechanisms such as riving knives.
Question: When should I use a stand for my table saw?
Answer: Due to them having smaller tables compact and portable table saws are inefficient for cutting large sheets of plywood or wood. Therefore, if you want to cut large trunks of wood or sheets of plywood, then you will need a table saw stand.
Question: What blade works best with my table saw?
Answer: It all depends on what you want to saw and how you want to cut the wood. For most general purpose cutting standard general purpose blades will do. But if you want to make unique cuts such as crosscuts, you will need blades designed for that.
Sometimes you may want to cut slots across the grain. In such scenarios, you will need dado blades. It is worth noting that not all table saws are compatible with dado blades.
Table saws come in all shapes and sizes. There are those that are large and nearly impossible to move and cost a fortune. Such are reserved for professionals. For homeowners and Do-It-Yourselfers portable table, saws are ideal.
Most of these table saws cost less than $600, with slightly over $450. While they are meant for home use, not every portable saw will be ideal for you. Therefore, it is important to consider your options.
Last update on 2020-12-05 / Affiliate links / Images from Amazon Product Advertising API