A table saw is a woodworker’s best friend; it is fast, powerful, and easy to use. So whether you are a DIYer or a professional, a table saw is one tool you need to have, especially since you can purchase one for less than $500.
The question is, which is the best table saw under 500? Table saws come in a variety of sizes and offer a wide range of features. Ultimately though, it comes down to what works best for you and your budget. With a budget of $500 and below, you will have lots of options to choose from.
Doing a comparison of the different options available will help you narrow down to the best portable table saw under 500. This is easier said than done though, and you may end spending more time sampling different models than is necessary.
To help reduce the workload, here are my top five favorite saws that you can buy for less than $500. I have used some of these saws and so bring my own personal experience. Without further ado, let’s get into it.
Review Of 5 Best Table Saw Under 500
DEWALT (DWE7491RS) 10-Inch Table Saw
The DWE7491RS is a portable job site table saw from Dewalt. Needless to say, Dewalt makes some of the best power tools on the market. So how does this offering from the 100-year-old company fair against the competition?
Starting off in the power department, it is a fairly powerful saw. With its 15 amp motor, it offers increased speed of 4800 RPMs. But how does it fare when put to the test? It has a maximum cut depth of 3.125 inches and a rip capacity of 32.5 inches, not bad for a portable saw.
In my tests, it was able to rip 5/4 inch deck boards with relative ease. Plywood was also not an issue for the saw. One thing that stood out for me was the built-in stand that is excellent for dealing with vibrations.
There is a built-in rack and pinion fence system. It acts as a guide for boards running parallel to the blade. This system is accurate and adjustable by hand. My only quarrel with this saw is the plastic miter gauge. All the same, it isn’t that big of a deal.
- The powerful 15 amp motor allows you to cut materials efficiently
- There is a rack and pinion fence system that allows for easy and accurate adjustment to the fence
- Comes with a stand that makes it easy to set up
- It comes with a 2-inch dust collection port that you can attach to a vacuum
- There is a built-in storage system for easily storing the saw’s accessories
- For larger materials, its speed might not be ideal
- It lacks a dado plate though it is compatible with dado blades
This Dewalt table saw has very many uses. It features all the components you would need in a job site table saw. The saw has one of the largest rip capacity on the market. This is one of the main reasons why I rank it top on my list.
Bosch Power Tools 4100-10 Tablesaw
The Bosch 4100-09 table saw is popular among many. And with the release of 4100-10, things could only get better. And get better they did, the newer 4100-10 takes what we loved about the 4100-09 and improves on it.
A 15 amp motor powers this new model and produces 4 Horsepower. While the blade rotates at 3650 RPM, so it is powerful enough to handle most of your wood cutting needs. In regards to rip capacity, it offers a 25-inch rip capacity.
Though it is dwarfed by the 32.5-inch rip capacity of the Dewalt, it is still sufficient to crosscut 4 ft wide sheets in half. One feature I found particularly good with this unit was the cast aluminum top with a coated finish.
When it comes to the blade, Bosch does away with the 40 tooth blade of the previous model and instead opts for a 24 tooth carbide blade. Given it’s the preferred blade for rip cuts, I mark it as an improvement.
- The included miter gauge is one of the best out-of-the-box miter gauges I have seen on a table saw
- It is powered by a powerful 15 amp motor and has the ability to cut just about anything
- For a portable saw, it has a relatively high rip capacity
- There is onboard storage included with this saw
- The 24 tooth carbide blade can be swapped out with a dado blade
- The ruler guides are a bit more confusing than on other models
- Compared to other table saw the tabletop has a smaller surface area
It is not always easy improving on an already great product. Thus the fact that 4100-10 is an improvement on 4100-09 is a testament to its performance and excellence. It is one of the best portable table saws on the market.
DEWALT DWE7480 10 in. Compact Job Site Table Saw
When you get the Dewalt delivered, the first thing that will surprise you is the weight. This saw is light, at just 40 pounds. Making it one of the most portable table saws on the market. But portability isn’t the only great thing about it.
Powered by a 15 amp motor, it can easily match its heavier and larger competitors when it comes to performance. Ripping ¾ inch plywood is no problem for this saw. It will also handle 2x pressure treated lumber with ease.
The rack and pinion fence system is a staple of Dewalt table saws. This system ensures that the fence remains parallel to the blade. One of the main benefits of this system is that fence adjustment is smooth and easy.
Like with the other Dewalt table on this list, this comes with onboard storage of all accessories. This onboard storage can be used to store all accessories from the riving knife to the blade guard.
- The table saw is lightweight, portable weighing only 48 pounds
- The rack and pinion system allows for smooth, accurate and quick fence adjustments
- Has a relatively large ripping capacity of 24.5 inches
- Comes with a solid T-style fence which holds plywood and another material when being cut
- Has a powerful motor that allows for cutting of different materials
- Does not come with a stand and you will have to purchase it separately
- The saw’s in-feed is not suitable for large pieces.
The Dewalt DWE7480 is one of the most portable and lightweight options. It is ideal for professionals who are looking for a job site table saw that is easy to transport. The motor installed in this unit has plenty of power for most tasks.
Milwaukee 2736-20 M18 Fuel ONE-Key 8-1/4 in. Table Saw
With many power tools going the cordless way, it was always a matter of time until table saws joined the cordless bandwagon. One of the first cordless table saws to hit the market was the Milwaukee 2736-20 M18 Fuel. How does it compare to the more traditional corded saws?
Out of the box, it looks like a very well made tool thanks to its metal frame. The rack and pinion fence system is something I have come to expect from job site table saws. And thankfully, this Milwaukee model did not disappoint in this regard.
The DEWALT Flexvolt was also one of the first cordless table saws on the market. What I didn’t like about it was the blade height adjustment. It took way too long to achieve full blade height. This is an annoyance I did not experience with the Milwaukee though.
With the Milwaukee, it only takes 14 turns to reach full blade height. On the other hand, the Flexvolt requires 35 turns to reach full height. When it comes to rip capacity, this model again impresses with a 24.5-inch rip capacity. This is enough for handling 4×8 plywood sheets.
- Weighing 40 pounds and cordless it is a highly portable table saw
- Offers a better blade height adjustment mechanism than the competition
- With a rip capacity of 24.5 inches, it can cut through standard-sized sheets of plywood
- Comes with an easy to use and adjust riving knife
- Has a safety feature that prevents the blade from starting when you insert a battery
- Would have been a better all-round saw if it had an AC adapter option
- Its comes with 8-1/4 inch blade instead of the more common 10-inch blade
This saw packs a big punch, and what surprised me is that it outperformed the beloved Dewalt Flexvolt in most areas. This is a solid power tool and is a great option for professionals and DIYers alike.
DEWALT DCS7485T1 FLEXVOLT 60V MAX Table Saw Kit
One of the Milwaukee 2736-20 M18 Fuel ONE-Key table saw’s closest competitor is the Dewalt Flexvolt. So we have already seen what the Milwaukee model can do, so what does the Dewalt Flexvolt offer?
Measuring 13 inches tall and 23 inches wide, it is a compact table saw with plenty of power. It weighs 48 pounds and has a handle for easy carrying. It’s so lightweight that you can actually carry it with one hand.
It has the same tested and proven rack and pinion fence available in other larger Dewalt saws. And just its Milwaukee competitor it features a 8-1/4 inch blade. Though it’s not the stand 10-inch blade we are used to, it is still good enough to cut 1-3/4 inches at 45 degrees.
Its rip capacity of 24 inches is quite impressive for such a lightweight table saw. One interesting and welcome feature of this tool is the on/off switch safety guard. To flip the switch on, you have to first flip a red paddle. This prevents accidental turning on of the tool.
- It maintains the rack and pinion fence system that allows for easy and smooth adjustment of the fence
- The 24 inch of rip capacity is sufficient for ripping 4×8 plywood
- Can be powered by both 20 volt and 60-volt batteries
- There is a power-loss reset feature that prevents accidental re-start after a power outage
- Has a metal roll cage that offers more stability than plastic bases
- The blade height adjustment is not the best
- Uses an 8-1/4 inch blade instead of the more common 10-inch blade
There was a lot of expectation heaped on this model being the first of its kind. It is fair to say it delivered and helped usher in an era of cordless table saws. While other models have been released since its introduction, its quality is still there for all to see.
Best table saw under 500 buying guide
Whether you are spending $1000, $500 or $300 on a table saw, you will want it to be of great quality. Most importantly, you will want a table saw that can meet your needs. So what features should you consider when shopping for the best table saw under 500? Here are the features that matter the most.
The most common blade sizes for table saws are 10 and 12 inches. Table saws that cost less than $500 will most likely have 10-inch blades. These blades are enough for handling most general tasks. For industrial projects, larger 12-inch blades become necessary.
But for less than $500, 10-inch blades will do just fine. Smaller blades in this price point may struggle when handling thick stock.
When you are looking to spend $500 on a table saw, you are most likely looking for a lightweight model you can use for different projects. This means you will be moving with the saw. Portability is thus an important aspect to consider.
Also, as a hobbyist, you probably don’t have a lot of room to keep a large bulky saw. A compact and lightweight option will do fine. At this price point, you can buy a portable saw that does not require a lot of room.
What accessories does the table saw come with? This is an important question to ask before splashing money on one. Accessories such as a miter gauge will come in handy when you need to make angled cuts.
Others such as a fence, will help in holding the wood in place. Onboard storage for storing these accessories is also important. Others such as a dust port that can be connected to a vacuum, help keep your work area clean.
Rip capacity is defined as the distance the rip fence can move to the right of the blade. For large sheets of plywood, I recommend a rip capacity of 24 inches at the least. If you are handling standard 2×4 plywood, then a rip capacity of less than 24 inches will do fine.
All the products reviewed above have their pros and cons. It’s a matter of deciding which works best for you as per your needs. Overall, there are very many table saw options at this price point, but not all deliver on their promise. The five above have demonstrated an ability to offer performance without compromising on weight and portability.
Last update on 2020-02-17 / Affiliate links / Images from Amazon Product Advertising API